Material datasheets available free. Online registration at: www.materialdatacenter.com
Victrex ST - PEKEKK - Victrex PLC
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Victrex ST" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...igh-performance PEEK films and PEEK powders as well as PEEK dispersions for coatings. In addition pipes made from PEEK have also become available. Victrex is the only one of the three manufacturers to also offer PEK (Victrex HT) as well as PEKEKK (Victrex ST) alongside PEEK. The HT grades have a glass transition temperature that is around 10°C higher at 152°C and a melting point of 373°C, whilst the ST grades have a glass transition temperature of 162°C and a melting point of 387°C. High-perform...
Kunststoffe international, 2014-10-10, Polyaryletherketones (PAEK)
... leading PAEK supplier, Victrex plc, Lancashire, UK, with global reach, deploys its extensive experience and new developments/advancements along with its established, comprehensive product portfolio. These include Victrex PEEK polymer, Victrex HT, Victrex ST and Victrex WG, Aptiv films, Vicote coatings, Victrex Pipes and the bio-compatible PEEK-Optima range. The headquarters is the site of the company’s two production plants with a current capacity of 4,250 t/a – including the production of PEEK...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.